TITLE>AGFAMATIC 110 CAMERAS - other cameras

AGFA 110 POCKET CAMERAS - other cameras

Agfa has therefore been one the first manufacturers of cameras in the format 110 and to produce the range of Agfamatic that has known a great success deserved.
Agfa has produced a lot models (to see comparison table) which possess all the following elements:

A body with aluminum part and design issued of the Minox, the "Repitomatic" film advance system, a red type release "Sensor" and a loading of the film door that opens downward. All these elements have been described in the page on Classic Agfamatic.

Here are some other interesting models:

· Agfa Autostar pocket (typ 2304/100)

(1976) Lens: fixed-focus "Color Optar" of 26mm. The instructions claim a focus range from about 1.2 meters / 4 feet to infinity. No speed choice, film advance by button and very simple viewfinder. The model "Autostar" is always the model the cheapest and simplest in the Agfa range. It is the alone Agfa pocket without release button Sensor but with a large button of metal.
No aluminum but a body in plastic matter and in iron built in Germany, India and Brazil. No metallic wrist-chain but a black nylon strap, Magicube (Flash-cube with mechanical activating) plug.

Aperture: fixed possibly f/5.6.
Identifiers: "AUTOSTAR Pocket" and the Agfa logo engraved in black on the front panel, " AUTOSTAR Pocket " in white print on the top panel

. Agfa Agfamatic 1000

(1974) Lens: fixed-focus "Color Agnar" of 26mm, the same as Agfamatic 2000.
Distance focus from1.2 meters / 4 feet to infinity. No speed choice,
film advance by button and simple viewfinder. A red shutter button "sensor" and body in black aluminum, which protect the lens and shutter button.

Delivered with wrist-chain and Magicube plug.

film advance button

Identifiers: " AGFAMATIC pocket 1000" and the Agfa logo engraved in white on the metallic part, " AGFAMATIC 1000" and "sensor" in white print on the top panel

. Agfa Agfamatic 1000S

Film loading door, the same for all cameras of this page.

(1978) Same body and functions that Agfamatic 1000 but aluminum part not painted in black and plastic window leaving to glimpse the release red Sensor when the camera is closed.

Identifiers: " AGFAMATIC pocket 1000S" and the Agfa logo engraved in black on the metallic part, " AGFAMATIC 1000S" and "sensor" in black print on the top panel
Other characteristics are the same as the model Agfamatic pocket 1000

. Agfa Agfamatic 508 (typ 2316)

(1978) Model in plastic matter with sliding part, resuming the design inspired the Minox C, that closed protects the lens, the viewfinder and blocks the sensor shutter button. The film advance is like on preceding models. Black nylon strap is to screw on the right side of the camera.

Identifiers: " AGFAMATIC 508" in white print on the front panel, "pocket" and the Agfa logo engraved in black on the metallic part, " AGFAMATIC 508" and "sensor" in black print on the top panel
Dimensions:

Closed: 113 (L) x 53 (W) x 27 (H) mm / 4.4 (L) x 2.1 (W) x 1.1 (H) inches
Open: 133 (L) x 53 (W) x 27 (H) mm / 5.2 (L) x 2.1 (W) x 1.1 (H) inches

Other characteristics are the same as the model Agfamatic pocket 1000

. Agfa Mini

(1981) Same body and functions that Agfamatic 508, the printing is just changing: inscription " AGFA Mini" instead of Agfamatic 508 Pocket.

Identifiers: " AGFAMATIC Mini" in white print on the metallic part, " AGFAMATIC Mini" and "sensor" in black print on the top panel
Other characteristics are the same as the model Agfamatic pocket 508

. Agfa Snapper

(1981) Same body and functions that Agfamatic 508, but camera body completely in colored plastic. six colors available: black, red, blue, brown, green and silver.
The printing is changing: inscription " AGFA Snapper" instead of Agfamatic 508 Pocket.

Identifiers: " SNAPPER" in white print on the front panel in colored plastic.
Other characteristics are the same as the model Agfamatic pocket 508

. Agfa Agfamatic 1008 pocket

**

(1978) Same body and functions than 508 but with switchable speeds by symbols: sun or cloud.
The sliding part is always in plastic matter but a system of closing allows keeping the camera closed.
On Agfamatic 508, any system of closing,
On Agfamatic 1008, 1008 tele, 2000 flash, 3000 flash etc : a closing system on the sliding part..
On "classics" Agfamatic 2000, 3000 and so on. : closing large button under the camera near the wrist-chain.

Identifiers: "AGFAMATIC 1008", "pocket" and the Agfa logo engraved in black on the front panel, sliding part in aluminum, "AGFAMATIC 1008" and "sensor" in white print on the top panel.

Flipflash plug

Other characteristics are the same as the model Agfamatic pocket 508

. Agfa Happy (typ 2317)

(1981) Same body and functions than 1008, but body in color plastic matter. The painting is "AGFA Happy" instead of Agfamatic 1008 Pocket.

Identifiers: "HAPPY" engraved in white on the front panel in color plastic.
Other characteristics are the same as the model Agfamatic pocket 1008

. Agfa Agfamatic 1008 tele pocket

(1975) Same body as 1008 Pocket, without switchable speeds. a button on the upper slide allows permuting the normal lens of 26mm (f11.0) by an optical group of 43mm, which is, placed ahead the shutter. A lens adapts automatically the viewfinder to give a view corresponding to the focal.

Identifiers: "AGFAMATIC 1008", "tele pocket" and the Agfa logo engraved in black on the front panel, sliding part in aluminum, "AGFAMATIC 1008" and "sensor" in white print on the top panel.
Identifiers: "AGFAMATIC 1008", "tele pocket" and Agfa logo engraved in black on the front panel, sliding part in aluminum, "AGFAMATIC 1008" and "sensor" engraved in white on the top panel.
Other characteristics are the same as the model Agfamatic pocket 1008

. Agfa Agfamatic 2000 flash pocket (typ 2326)

(1981) Same body as 2008 Pocket, but with a built-in flash included in the sliding part. fixed-focus lens of 26mm. From 1.2 meter/ 4 feet to infinity. the selection of speed is done by one of the two symbols "weather". Sun for 1/100 sec. and clouded sky for 1/50 sec.
The mechanism seems enough complex because during the rearmament the electronic flash returns in the body of the camera. A light on the over the camera indicates that the flash is ready for function. Two AAA batteries deliver power.

Identifiers: "AGFAMATIC 2000", "flash pocket" and the Agfa logo engraved in white on the front panel, Black sliding part, "AGFAMATIC flash" and "sensor" in white print on the top panel. sliding part in black plastic matter.
Other characteristics are the same as the model Agfamatic pocket 2008

. Agfa Agfamatic 3000 flash pocket (typ 2323)

(1979) Same body as 3008 Pocket, but with a built-in flash included in the sliding part. Lens "Apotar" lighter and variable exhibition by four diaphragms chosen by symbols: Sun on sea, Sun, veiled Sun, Cloud. These pictograms are completed by a distance scale (in blue letters) in feet and meters for using the built-in flash.

batteries and film doors

Agfamatic 3000 flash versus Optima 5000

The length of this Agfamatic is the most important of all models (including Optima 5000 and 6000 or Agfamatic 5008 and 6008).

Identifiers: "AGFAMATIC 3000", " flash pocket" and Agfa logo engraved in white on the front panel, Black sliding part, "AGFAMATIC flash" and "sensor" engraved in white on the top panel. sliding part in black plastic matter.
Lens: Fixed Focus "Color-Apotar" 26mm f/4 with 3 lenses.
Sensibility: 100 et 400 ASA
Speed: 1/80 to 1/250s
Synchro flash speed: 1/80
Flash number guide: 12
Powered by two AAA batteries.

Closed : 142 (L) x 53 (W) x 30 (H) mm / 5.6 (L) x 2.1 (W) x 1.2 (H) inches
Open : 150 (L) x 53 (W) x 30 (H) mm / 5.9 (L) x 2.1 (W) x 1.2 (H) inches

Other characteristics are the same as the model Agfamatic 2000 flash pocket

. Agfa Traveller

(1982) Same body as Agfamatic 3000 tele Pocket, but with a sliding part in aluminum. More elegant than the original model.

Identifiers: "AGFA TRAVELLER " engraved in black on the front panel, sliding part in aluminum.
Other characteristics are the same as the model Agfamatic 3000 flash pocket.

. Agfa Easy

(1982) Same body as Agfamatic 3000 tele Pocket,

Identifiers: "AGFA EASY " engraved in white on the front panel, black sliding part.
Other characteristics are the same as the model Agfamatic 3000 flash pocket.

. Agfa Agfamatic 4000 flash pocket

(1980) Same body as 4008 Pocket, but with a built-in flash included in the sliding part. More luminous "Apotar" lens of 26mm/6,3 and a variable shutter managed by an electronic shutter. Variable speeds of 1/250 sec to 30 sec. Focus by symbols: Mountain, Group (Two people ) and one person.
These symbols are completed by a distance scale (in blue letters), in feet or meters that is coupled to diaphragms for the utilization of the Flash. 4m, 2m and 1,2 m. A led in the finder indicates the correct exhibition and warning for flash use. Electronic built-in flash.

Identifiers: "AGFAMATIC 4000", " flash pocket" and Agfa logo engraved in white on the front panel, black sliding part, "AGFAMATIC flash" and "sensor" engraved in white on the top panel. sliding part in black plastic matter.
Other characteristics are the same as the model Agfamatic 3000 flash pocket

. Agfa Agfamatic 901 motor

Agfamatic 901 with compact flash

(1979) Particular series of Agfamatic, presented at Photokina 1978, with in the same dimensions that the original model, an integrated motor. This motor works view by view for the 901, view by view and series 0,8 frame/sec. for 901 E and 901S.

The Sensor release button is kept but the sliding part disappears. A protection cap protects the lens between two views.
The unique button on the top panel allows closing the shutter and choosing the speed by the selection of one of the two symbols "weather". The sun for 1/100 sec.. and the covered sky for 1/50 s.
two AAA batteries power Agfamatic motor. They are situated near the viewfinder in the optical axis, contrarily to the Agfamatic flash. The series of Agfamatic motor has, on its side, a special plug allowing to connect an electronic flash and insuring the electrical contacts.
The compact flash (figure above) draws its energy directly on the Agfamatic, the normal flash (figure above) possesses its own power source by two AAA batteries.
The Agfamatic motor series has a special socket on the side allowing the attachment of an electronic flash and ensuring the electrical contacts.
The compact flash (figure above) draws its energy directly from the Agfamatic, the normal flash (figure above) has its own power source two AAA batteries.
There were four variants of Agfamatic 901:
- the 901 motor: no continuous shooting, no cartridge, 2 speeds, available in black or in white (?),
- the 901 S motor: continuous shooting, no cell, 4 settings, available in silver or black,
- the 901 E motor: continuous shooting, CdS cell, adjustment slider, available in silver or black,
- the 901 SE motor: continuous shooting, CdS cell, automatic, available in silver or black.

The lens is a Color Apotar 27mm opening at f1: 6.3 in 3 elements, the speeds are only two: 1/50 s and 1 / 100s, the minimum focusing is 1.2m up to infinity, the optical viewfinder is collimated with parallax indication, there is a availability to recognize the sensitivities of films of 64, 80 or 400 ASA connector for a flipflash.
its dimensions are 125x30x53 for a weight of 149gr (without batteries)

Identifiers: "AGFAMATIC 901", " motor" and Agfa logo engraved in white on the front panel, "AGFAMATIC 901 motor" engraved in white on the top panel. No sliding part.
Two diaphragm adjustments by symbols.
Dimensions:

Closed : 113 (L) x 53 (W) x 27 (H) mm / 4.4 (L) x 2.1 (W) x 1.1 (H) inches
Open : 133 (L) x 53 (W) x 27 (H) mm / 5.2 (L) x 2.1 (W) x 1.1 (H) inches

. Agfa Agfamatic 901 S motor (typ 2321)

(1979) Same body as Agfamatic 901 motor, but with possibility of view in series. A large button marked black button "SERIES" , near Sensor button on the top panel, allows, once sunk, putting views in series. Cadence of view is very weak, approximately 0,8 view by second.

Identifiers: "AGFAMATIC 901 S", " motor" and Agfa logo engraved in white on the front panel, "AGFAMATIC 901 S motor" engraved in white on the top panel.
Four diaphragm adjustments by symbols.
Other characteristics are the same as the model Agfamatic 901 motor.

. Agfa Agfamatic 901 E motor (typ 2322)

(1979) Same body as Agfamatic 901 motor, but with possibility of shooting views in series and electronic exposure as on Agfamatic 4008.

Silvered or black model.
For the silvered model :

Identifiers: "AGFAMATIC 901 E", " motor" and Agfa logo engraved in black on the front panel, "AGFAMATIC 901 E motor" engraved in black on the top panel.
Two diaphragm adjustments by symbols.
Other characteristics are the same as the model Agfamatic 901 motor.

. Agfa Agfamatic 901 SE motor

(1982) Same body as Agfamatic 901 S motor, but with possibility of shooting views in series and electronic exposure as on Agfamatic 4008.

Identifiers: "AGFAMATIC 901 SE", " motor" and Agfa logo engraved in black on the front panel, "AGFAMATIC 901 E motor" engraved in black on the top panel.
Four diaphragm adjustments by symbols.
Other characteristics are the same as the model Agfamatic 901 S motor.

. Agfa Tramp

(1982) Same body and functions that 901 S, but body entirely in plastic of brown khaki color.

Identifiers: "AGFA" and Agfa logo engraved in white and "TRAMP" engraved in black on the front panel, ""AGFA" engraved in white and "TRAMP" engraved in black on the top panel.
Other characteristics are the same as the model Agfamatic 901 S motor.

. Agfa Tramp 2

(1982) Same body and functions that Tramp, but with marking "Tramp 2" instead of "Tramp"

Identifiers: "AGFA" and Agfa logo engraved in white and "TRAMP 2" engraved in black on the front panel, ""AGFA" engraved in white and "TRAMP 2" engraved in black on the top panel.
Other characteristics are the same as the model Agfamatic 901 S motor.

. Agfa Sport

**
Agfamatic Sport with waterproof and shockproof container.

(1982) Same body and functions that 901 S, but body fully in red plastic matter. The body has trips painted on the front panel and the over the camera.
This camera was delivered in a blister pack including the "sport" device, a waterproof and shockproof red container, and three 110 format films.

Identifiers: "AGFA sport", horizontal trips and Agfa logo engraved in white on the front panel and on the top panel.
Other characteristics are the same as the model Agfamatic 901 S motor.

. Agfa Star

(1982) Same body and functions that 901 S but body entirely in plastic of earth color.

Identifiers: "AGFA star" engraved in white on the front panel and on the top panel.
Other characteristics are the same as the model Agfamatic 901 SE motor.

. Agfa Colour King 100 tele

(?) Model similar to model Agfamatic 1008 tele pocket
a button on the upper slide allows to permute the normal lens of 26mm (f11.0) by an optical group of 43mm, which is, placed ahead the shutter. A lens adapts automatically the viewfinder to give a view corresponding to the focal.
Agfa Colour King are in plastic completion black and are recalled " Colour King" to be sold by Dixons photographic in England

identifiers: "colour King", "100 tele" and the Agfa logo engraved in white on the front panel, mobile section is black plastic, "colour king 200 tele" in white print on the top panel.
Other characteristics are the same as the model Agfamatic tele pocket 1008

. Agfa Colour King 200

(?) Model similar to model Agfamatic 2008 pocket

. Agfa Colour King 200 tele

(1979-1980) Same body as 2008 Pocket, a button on the upper slide allows to permute the normal lens of 26mm (f11.0) by an optical group of 43mm, which is, placed ahead the shutter. A lens adapts automatically the viewfinder to give a view corresponding to the focal.

identifiers: "colour King", "200 tele" and the Agfa logo engraved in white on the front panel, mobile section is black plastic, "colour king 200 tele" in white print on the top panel.
Other characteristics are the same as the model Agfamatic tele pocket 2008

data from website Eric Carlhan

. Agfa Colour King 400

(?) Model similar to model Agfamatic 4008 pocket

. Werlisa 110

(?) Model equivalent to Agfamatic Happy camera.

(1984- ) Same body as Happy, the Werlisa 110 is manufactured and assembled in Spain for export under Agfa license. The shutters were imported from Germany. Five colors were available.

Identifier: "Werlisa" engraved in black on the mobile section is white plastic, "Werlisa" in black print on the top panel.
Other characteristics are the same as the model Agfamatic Happy

data from website Sylvain Halgand

. Revue pocket 50

(1982) Model commercialized by the brand shop REVUE, this model is identical to the Agfamatic pocket 2008 but possesses a black finish (including the sliding part and is without the red release Sensor, exclusivity of Agfa. This last one is replaced by a gray plastic square button.

Identifiers: "REVUE", "pocket" and "50" engraved in white on the front panel, sliding part in black plastic matter.
Other characteristics are the same as the model Agfamatic 2008 pocket

. Revue pocket 250

Identifiers: "REVUE", "pocket" and "250" engraved in white on the front panel, black sliding part in plastic matter.
Other characteristics are the same as the model Agfamatic 2008 pocket

. Revue pocket 350

(1982) Model commercialized by the brand shop REVUE, this model is identical to the Agfamatic pocket 3008 but possesses a black finish (including the sliding part and is without the red release Sensor, exclusivity of Agfa. This last one is replaced by a gray plastic square button.

Identifiers: "REVUE", "pocket" and "350" engraved in white on the front panel, black sliding part in plastic matter.
Other characteristics are the same as the model Agfamatic 3008 pocket

. Revue pocket 450

(1982) Model commercialized by the brand shop REVUE, this model is identical to the Agfamatic pocket 4008 but possesses a black finish (including the sliding part and is without the red release Sensor, exclusivity of Agfa. This last one is replaced by a gray plastic square button.

Identifiers: "REVUE", "pocket" and "450" engraved in white on the front panel, black sliding part in plastic matter.
Other characteristics are the same as the model Agfamatic 4008 pocket

. Revue tele pocket 150

(1982) Model commercialized by the brand shop REVUE, this model is identical to the Agfamatic tele pocket 1008 but possesses a black finish (including the sliding part and is without the red release Sensor, exclusivity of Agfa. This last one is replaced by a gray plastic square button.

Identifiers: "REVUE", "tele pocket" and "150" engraved in white on the front panel, black sliding part in plastic matter.
Other characteristics are the same as the model Agfamatic 1008 tele pocket

. Revue pocket 300 Flash

Agfamatic 3000 flash compared to Revue Flash 350

(1982) Model commercialized by the brand shop REVUE, this model is identical to the Agfamatic pocket 3000 Flash but possesses a black finish (including the sliding part and is without the red release Sensor, exclusivity of Agfa. This last one is replaced by a gray plastic square button.

Identifiers: "REVUE", "flash pocket" and "300" engraved in white on the front panel, black sliding part in plastic matter.
Other characteristics are the same as the model Agfamatic 3000 Flash pocket

To leave a message, to go to the Menu Pocket 110, or to Main Photo Menu

private collection © photos Pierre J. except ** images
Created the February 21^st 2003, updated the January 13^th 2025
© Pierre J.